Cogent Tech Solutions

Digital input modules P- or N-switching; Reverse polarity protection, up to 3-wire +FE Digital input modules from Weidmüller are available in different versions and are used primarily to receive binary control signals from sensors, transmitters, switches or proximity switches. Thanks to their flexible design, they will satisfy your need for well co-ordinated project planning with reserve potential. All modules are available with 4, 8 or 16 inputs and comply fully with IEC 61131-2. The digital input modules are available as P- or N-switching variant. The digital inputs are for Type 1 and Type 3 sensors in accordance with the standard. With a maximum input frequency of up to 1 kHz, they are used in many different applications. The variant for PLC interface units enables rapid cabling to the proven Weidmüller interface sub-assemblies using system cables. This ensures rapid incorporation into your overall system. Two modules with a timestamp function are able to capture binary signals and to provide a timestamp in 1 μs resolution. Further solutions are possible with the module UR20-4DI-2W-230V-AC which works with accurant current up to 230V as an input signal. The module electronics supply the connected sensors from the input current path

Shaft incremental encoder, EV50 Series, Clamping flange, Shaft Diameter 10g6 mm, Supply Voltage 10...30 V DC, Output Push-pull(with inverted signal), Radial, M12 8-pin, Resolution 1024

Passive Distribution Box, m12, 8-port,2 powers and 2 signals with PNP LED, with terminal connection

• Product typePassive Distribution Box
• Connector typeterminal
• I/O portM12
• I/O port No.8
• Signal quantity2
• LED indicatorPNP
• Cable materialPUR/PVC
• Drag chainFixed installation
• IP ratingIP67
• Shielded/UnshieldedNO
• Cable length0 m
• Operating voltage DC24 V
• Total current max.16 A
• Housing materialPC + ABS
• Product application functionDigital

Cutting tools for conductors up to 8 mm, 12 mm, 14 mm and 22 mm outside diameter. The special blade geometry allows pinch-free cutting of copper and aluminium conductors with minimum physical effort. The cutting tools (KT 8 to KT 22) also come with VDE and GS-tested protective insulation up to 1,000 V in accordance with EN/ IEC 60900.

Control web-based, u-create web, u-OS, IP20, 2 x RJ45 plug-in connectors, 24 V DC +20 %/ -15 %, Micro USB 2.0, -20 °C...55 °C

Compact and powerful solid-state relays in terminal block format Saving space in the panel is becoming more and more important, and requires increasingly compact components. With the compact and powerful MICROOPTO solid-state relays, you benefit from our decades of experience in manufacturing products in terminal block format. The MICROOPTO family comprises high-quality solid-state relays for applicationspecific problem solving and delivers high performance in a width of just 6.1 mm. The wide range of accessories from plug-in cross-connections to endto-end marking solutions makes it particularly versatile. Thanks to international approvals, they can be used worldwide. Reliable function is ensured by the integrated protective suppressor circuit for inputs and outputs. The wide MICROOPTO portfolio includes a range of solutions for special loads. For example, for inductive loads up to 10 A at 24 V DC or for DC loads up to 300 V. In addition, there are solutions for decoupling 5 V TTL inputs and outputs, for frequencies up to 550 kHz, as well as the single CO contact version for inverting signals.

FrontCom® Vario integrates multiple functions in only one single frame. The system is easy to install and you can select from a wide range of data, signal and power modules. In addition to being extremely compact, FrontCom® Vario offers a number of unique product features that will make your project planning and work activities secure, fast and future-proof. Furthermore, the FrontCom® Vario system has an attractive housing design that, by the way, offers highest impact-resistance and fully meets the requirements of IP 65 protection class. 

Use our diode and redundancy modules to connect two power supplies and compensate for a device failing. In addition, our capacity module offers power reserves, guaranteeing purposeful and quick triggering of a circuit breaker, for example

The Weidmüller FM 4/TS35 Mounting Foot is a high-quality accessory designed for securely mounting components onto TS35 DIN rails. Made from nickel-plated steel with a bright finish, it ensures durability and resistance to corrosion. The snap-on mounting type allows for easy installation and removal, making it ideal for industrial applications where reliability is paramount.

The aluminium Klippon® K enclosures are suitable for use in an extremely wide range of different areas. Various components can be installed inside the enclosures, and will benefit in particular from the high temperature resistance, the excellent IP protection and the good impact resistance. No matter what kind of application the customer is planning, Weidmüller is able to provide a wide range of aluminium enclosures precisely fitting the customer's requirements. Klippon® K enclosures for hazardous areas are available on request. Our extensive product range offers the following advantages: • Available in two surface finishes: natural and powdercoated (RAL 7001) • With chloroprene moulded seal as standard (silicone moulded seal optionally available) • Standardised closure system with Torx slotted screw head for 19 enclosure sizes • Mounting holes outside of the gasket area • High IP protection classes: IP66, IP67 and IP68 according to DIN EN 60529 • Impact resistance of up to 7 (10) Joules • The enclosures are approved according ATEX, IECEx, EAC, cULus, Russian Maritime Register and DNV GL as well as the empty enclosure standard. 

SE30 emergency stop switch, Surface installation, Output contact 1 N/C (monitor) + 1 N/C + 1 N/O, Screw terminal, IP65.

The Weidmüller tool chest offers the foundation for your mobile production station and can be extended flexibly to suit your processes. Space efficiency, functionality and optimized ergonomics characterise this member of the Weidmüller family.

The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. 

Cutting tool for terminal rails and profiled rails •TS 35/7.5 mm according to EN 50022 (s = 1.0 mm) •TS 35/15 mm according to EN 50022 (s = 1.5 mm)

SE4 safety light curtain, Type 4, Optical synchronization, Automatic reset, Output type PNP/NPN, Resolution 30 mm, Protective height 300 mm, Operating range 10 m, Cable 0.3 m with M12 connector plug.

Weidmüller VPU I (Type I), VPU II (Type II) and VPU III (Type III) surge protection products effectively reduce the interference coupling that can occur due to transient surge voltages, even significantly below the limits prescribed by insulation co-ordination according to EN 60664-3 / DIN VDE 0110-3. This means that the whole installation is exposed to fewer malfunctions. The arresters are co-ordinated using technical means. This means that decoupling between Types I, II and III is unnecessary. The arresters are tested according to product standard IEC 61643-11 / DIN EN 61643-11 and can be installed in systems according to IEC 61643-12 / VDE 0675-6-12 and IEC 62305-4 / VDE 0185-4. This lightning and surge protection device is suited for installation in power supply systems. Weidmüller offers different products depending on the particular mains network type and voltage level. A special Type I and Type II protective device is even available for photovoltaic applications.

The analogue converters of the EPAK series are characterised by their compact design.
The wide range of functions available with this series of analogue converters make them suitable
for applications which do not require international approvals.

Properties:

• Safe isolation, conversion and monitoring of your analogue signals
• Configuration of the input and output parameters directly on the device via DIP switches
• No international approvals
• High interference resistance

With the fully encapsulated WCU 501 and WCU 650 logic modules, you monitor, control and regulate your processes - even under extreme environmental conditions. In this regard, the WCU series offers optimum dimensions, performance, robustness and user-friendliness. The graphic and intuitive Micon-L programming environment enables flexible switching of the analogue and digital inputs, plus the digital outputs too. The scope of both the software and the hardware can be expanded to suit customer requirements upon request. .

For protection against overcurrent, we offer cartridge fuse with dimensions 5x20 mm in sizes from 100 mA to 6.3 A.

SL100 safety lock, Mechanical locking, Max locking force 1200N, Output contact 2 N/C + 2 N/C, Screw terminal, IP67.